I have started to use pegasus mail today, problem is all mail was downloaded and deleted from server.
I figured out how to undo the download part, but is there any way to put back the mail to the server? since i am using an email client on my phone aswell, which is unable to get the mails when they are deleted from server when downloaded and removed by Pegasus.
Greetings. I am working to configure Pegasus. I have checked the POP3 and SMTP settings with the server for my website, and they are all confirmed to be correct. MS Outlook connects with no problem using these settings, but Pegasus both on my desktop and on my laptop finds the password wrong.
Is there any advice in a case like this? I would much like to use PM instead of Outlook. Thank you.
18. SSL read error -24 (locus 0, type 0, 'Received TLS alert message: Close notifyÌ
Pegasus "is" working normally except when I tried to send a specific email with an xls and pdf as an attachment, to maybe 8 folks in a group. A Reply All send of an email. And I got the Connection timed out Trace info, ending with what is shown above. The list of addresses shows first, then DATA, then the error is the last line.
And I get a "Mail Delivery Failure." email every time it fails to send, referring to a generic TCP/Ip failure.
I've sent other emails, they go first as number 1 in the queue, then the failure box pops up on number 2, which is the email now stuck in the queue. But I got a copy of the email in my other gmail account.
What have I done wrong?
I'm finding Pegasus's IMAP performance with Yahoo mail rather poor. (I'm using Yahoo mail's free, standard version, which supports IMAP.) The connections seem very fragile and unreliable. Pegasus frequently reports error advisories from the server, there are inconsistencies between what Pegasus shows and what's shown in Yahoo's web-client, folder refreshes fail, disconnections abound (though Pegasus doesn't call them that), and many of what Pegasus reports as server-errors cause it to completely crash. (These occurrences are quite frequent.) Are others experiencing the same?
I'm wondering if this is client related (i.e. poor handling of IMAP errors in general) or if Pegasus has more compatibility problems with Yahoo mail than it does with other IMAP servers. I'm also wondering if it could be related to any of the issues discussed here. That discussion is a few years old, so things may have changed since then, but some of the issues discussed there are: non-protocol handshaking by Yahoo and that Yahoo's IMAP is biased towards 3G use and doesn't like Wifi connections.
Would I get better IMAP reliability in Pegasus using a different provider? Pegasus does seem to work better for me with other IMAP servers, but my experience is not a fair comparison since my other email accounts are very low-volume usage compared to my Yahoo account.
I have successfully migrated Pmail 4.63 from my XP computer (SATCHEL) to my Win7 Computer (SNOWY).
C:\Pmail\Programs\winpm-32.exe launched from Windows Explorer works fine, with <default> as ID.
Short cut C:\Pmail\Programs\winpm-32.exe -A -ID imadunce@myisp works fine, with imadunce@myisp as ID. I can send and receive mail. So far, so good.
I want to run Pmail from either SNOWY or another networked computer, SATCHEL. (The 2 computers are in the same room, so if I'm on SATCHEL and my wife is on SNOWY, I'll just ask her to close Pmail on SNOWY.)
So, per thread 28494 (Thomas Stephenson), I use C:\PMAIL\Programs\pconfig in DOSBox to change the HOME and NEW mailboxes to \\SNOWY\OS\PMAIL\MAIL\~8. I use a hex editor to confirm that C:\Pmail\Programs\pmail.cfg. has changed the mailboxes and increased slightly in length.
After only that change, when I launch Pmail from either Windows Explorer or my shortcut, the splash screen appears, with a box on top asking for my Pegasus Mail username. It won't accept imadunce@myisp, or A, or Admin, or random cusswords.
Deleting pmail.cfg and relaunching, choosing Only User and the default C:\PMAIL\MAIL makes it work again on SNOWY, but when I try to run it from SATCHEL, I get a couple seconds (SATCHEL is slow) of Pegasus splash screen, and then nothing.
Any ideas what's going on?
I am using Pegasus 4.63 with 2 users on a windows XP computer. One of the user mail boxes opens normally. The other one hangs on the start up screen and will not open. Can anyone suggest a way to fix this problem. It would be most appreciated.
Thanks
Hi not sure whether this should go on the Mercury or Outlook threads....
One of our users who has used Outlook in the past asked to use outlook here and despite being shown the IMAP folders for her account on the server set up new personal folders on her PC. We now need to transfer the emails stores there back to the server, is there an easy way to do this, ideally we would like to merge the messages into the existing folder structure on the server rather than just drag the folders across and end up with two similarly named sets.
After a slight glitch with my Dell laptop I was left able to download
messages but unable to send .This is what came back to me as undelivered
message:
*******************************************************************
Delivery has failed on the enclosed message for the following
reasons reported either by the mail delivery system on the mail
relay host or by the local TCP/IP transport module:
550-mgt.gla.ac.uk not hosted on this server - please use correct MX
Your original mail message follows:
--------------------------------------------------------
X-PM-Identity: <Default>
From: "Myles" <dryden@mgt.gla.ac.uk>
To: dryden@mgt.gla.ac.uk
Date: Fri, 25 Oct 2013 11:34:59 +0100
MIME-Version: 1.0
Subject: test 5
Message-ID: <526A4953.10275.454164@dryden.mgt.gla.ac.uk>
X-Confirm-Reading-To: "Myles" <dryden@mgt.gla.ac.uk>
X-pmrqc: 1
Return-receipt-to: "Myles" <dryden@mgt.gla.ac.uk>
Priority: normal
X-mailer: Pegasus Mail for Windows (4.52)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Content-description: Mail message body
*******************************************************************************************
I am using Pegasus Mail 4.5 with Vista.
Can anyone please help me to get back on track!
Thanks
Good morning,
Last week I migrated Pegasus to a new computer (Win 8 x 64) - incoming / outgoing works just as designed and no problem.
Files transfer from the new mail folder to other folders without a problem - the ONLY problem I have is not being able to create a new tray or folder!!
When trying to create a new folder (or tray) Pegasus freezes! The only way to shut down the process is via task manager.
I welcome any advice as to where to look for the issue and how to rectify.
Thanks in keen anticipation.
Boris
I presently have a very large number of emails in my inbox of a web-based provider. I want to download them into Pegasus, but do not want to do so in one download. What I'd like to do is download a certain number at one time. I've already tried selective mail download but for some reason, the headers quit downloading somewhere along the line.
I also tried just downloading, and then cancelling part way through. That worked fine in that it downloaded the messages until I cancelled, but it did not delete the messages off the server. (I read up and see that the messages are removed at the end of a successful download session).
Any ideas as to a way to either (1) troubleshoot the selective mail download; or (2) figure out some other way to incrementally retrieve emails with those retrieved being deleted off the server?
Thanks. John.
I'm running PMail 4.41 on XP SP2 (details below) and am having a problem with slow deletion. In my options, I have "Preserve deleted mesages until Pegaus Mail closes" and "'Deleted Messages" folder persists between sessions" checked. My mailbox folder is 139 MB, containing 1,132 files.
When I delete a single message from the New Mail (or any other) folder, I get an hour glass cursor, and it takes about 4 seconds. When I select multiple messages (5-6), it takes about 15 seconds, and the screen goes blank white except for the blue bar at the top and the Windows task bar at the bottom.
The slow deletion has been a problem for some time. The blank screen during deletion is new. Needless to say, this behavior is irritating.
Anyone got a cure?
Thanks!
------------------------------------
WinPMail version: Version 4.41 (Win32), Jul 16 2006
Language resources: Standard UK English resource set
Extension Manager version: 1.13
Operating mode: Standalone
User name and ID: Admin, 0
Windows version: 5.1
Windows flag word: 0
WINPMAIL.EXE directory: C:\Pegasus\Programs
Home mailbox location: C:\PMAIL\MAIL\Admin
New mailbox location: C:\Pegasus\MAIL\Admin
TMP environment variable: C:\DOCUME~1\lnelson\LOCALS~1\Temp
TEMP environment variable: C:\DOCUME~1\lnelson\LOCALS~1\Temp
LAN-based SMTP support: N, N, N
NetWare MHS support: N, N, N
Built-in TCP/IP support: Enabled
- WINSOCK version: WinSock 2.0
- WINSOCK path: C:\WINDOWS\system32\WSOCK32.DLL
Commandline: -A
Active -Z options: 32768
PMR variable: (None)
PML variable: (None)
MAI variable: (None)
NB variable: (None)
Hullo Forum
I have recently changed my memory chip on which I keep Pegasus 4.63 and which moves between a desktop XP machine and a Windows7 64bit laptop.
Whilst Pegasus on the new 16gb chip reads fine when attached to the desktop, either in standalone mode or as an archived mailbox hanging off the desktop's version of Pegasus, it fails when I try to open any folders on the laptop at which stage I'm told that the folder is damaged and cannot be opened. The suggested re-indexing doesn't work - and as there is plenty of space both on the new chip and on the laptop, it wouldn't appear to be a space problem.
Pegasus is also installed directly on the laptop and runs fine in this mode. But the laptop doesn't allow me to "add (the chip as a) mailbox" to the folder list.
I have seen the threads about problems with Windows 7; mine doesn't seem to be (exactly) the same issue for my previous chip worked reasonably well on this Win7 laptop.
Another strange thing about this problem is that the internet wizard pops up every time I try to open the chip-installed Pegasus on the laptop. (But not on the desktop; that setup works fine.)
Any hints how to overcome this weird problem would be much appreciated.
Thanks
Johnny
Greetings from Texas, USofA,
My 'Copies to Self' are not being saved in the mailbox that was assigned the task of storing them. Even if I use my own addy in the To: field when sending to some friends it still lands in SPAM HALTER.
Have checked the filters and they are still the same as when setting them up and they worked just fine for almost a year. Any Replied mail is also being placed in SPAM Halter folder.
Any ideas would be a HELP!!
.
Hi all,
How can I change the standard mail program in Windows 8.1?
In setting 'change standard protokoll' I only can choose between the defaults 'MAIL' and 'MS-MAIL' or 'search APP in Windows Store'.
Pegasus doesn't show up anywhere.
Any idea?
Thanks in advance,
daniel
Hi
Today I copied an address: Subscriber.xxxxxx.Bulletins@ebulletins.co.uk from within Pegasus Mail. The address was in the body of the message, and was a mailto: link. I right-clicked the address and chose the option to 'Copy address to clipboard'.
When I pasted it the address had been adjusted and appeared as mailto:Subscriber.xxxxxx@Bulletins@ebulletins.co.uk
I understand that having two dots may be unusual for an address but I'm surprised that the address has been edited. Is this intentional or do I have a problem with Pegasus Mail?
Thanks!
In Pegasus's local "Copies to Self" folder (the default location for copies of outgoing mail), it very sensibly shows the recipient rather than the sender in column 1 (even though, as in all other folders, the column-header says "From"). Is there a reason why it doesn't do the same in IMAP folders called "Sent"? It would be very helpful to be able to sort such folders by the value in the "From" column -- but only if it shows the recipient; it's pretty useless sorting such folders by sender when the sender is the same (yourself) for all emails in that folder.
Perhaps this is something the development team for the beta 5 version could consider?